Check-TeamsUserProvisioning - Check Provisioning Status of SfB and Teams Users

Introduction You may from time to time have run in to an issue where an Teams/SfB user has not been provisioned correctly. The most common scenario for this is a delay in Office 365 provisioning the user - you have assigned the required SfB/Teams licenses and it has yet to become available to the end user (it is not uncommon for licenses to take over 24 hours to be provisioned). [Read More]

Deep Dive: Teams Direct Routing Media Bypass

This article will assume you already have Teams Direct Routing in place. If you are not there yet, consider looking at my article on this subject: https://www.lee-ford.co.uk/teams-direct-routing-with-an-audiocodes-sbc/ Introduction to Media Bypass A welcome addition to Teams Direct Routing is Media Bypass. Before Media Bypass was released, all media when using Direct Routing would need to route up to one of six regional Teams Media Processors and back even if the Teams client and SBC were in the same location. [Read More]

TeamsAdminTool - Manage Teams, Channels and Tabs easily

Disclaimer: This script is provided ‘as-is’ without any warranty or support. Use of this script is at your own risk and I accept no responsibility for any damage caused. Introduction For a while I’ve been managing Teams using the Teams Admin Centre and PowerShell module but there have been some tasks I’d like to undertake that were not possible unless I joined the Team I wanted to make the change for e. [Read More]

Change Teams to the Default IM App (by using a script)

Introduction When using Office applications, such as Outlook, you will see the presence and contact cards that appear when hovering over a user. From here you can initiate actions such as an IM or call etc. This is all based on the “DefaultIMApp” value in the current user’s registry. If the user is using Skype for Business, this does not need any action from the user. However, in Teams, this needs to be enabled by the user under settings in Teams: [Read More]

New Team request for Teams using Flow (and Graph API)

Whilst Flow does have some integration with Microsoft Teams, one missing feature is the ability to create a Team in Microsoft Teams (you can create Channels, messages etc.). With recent additions to Graph API, you can create a Team using a template and a Graph API call. This API call can be used within a flow. In this scenario, I’m going to create a flow to create a Team. This will work like so: [Read More]

Send Message Cards with Microsoft Teams

Microsoft Teams has a feature that I don’t see used or talked about a whole lot - Cards. Cards allow you to post a container to a Teams channel. The type of card I will use here is a Message Card. These can contain text, images, links etc. Message Cards are not to be confused with Adaptive Cards. These are entirely different and are not exclusive to Teams. Adaptive cards are more flexible and interactive than Message Cards but unfortunately, do not support the method I employ here - Incoming Webhook. [Read More]

Direct Routing in Azure using AudioCodes Mediant SBC Azure Edition - Part 1

This article is now out-of-date, please refer to this article for Deploying an AudioCodes SBC in Azure using the Azure Marketplace. Introduction I’ve written in the past about deploying AudioCodes SBC into Azure by using Azure Site Recovery. Whilst this works, it’s not supported! I recently asked AudioCodes if there were any plans to officially release an “Azure Edition” of the SBC and to my surprise, they said “Yes”. It’s about to hit GA, but I’ve been given a pre-release build to try. [Read More]

Teams Direct Routing with an AudioCodes SBC

Introduction Last Updated: 13/05/19 Microsoft has released Direct Routing for Microsoft Teams. This is one of the big steps – in my opinion – of making parity with Skype Online. Direct Routing effectively allows you to connect up existing PSTN connectivity (e.g. SIP trunks) into a certified SBC and route directly to Teams. This differs from the Skype Online method of doing this, in that you no longer need any hardware (on-premises Skype for Business Server or a CCE) other than an SBC. [Read More]

One Liner: Check if a PSTN number is blocked in Skype Online or Teams

Recently added to Skype Online and Teams is the ability to block inbound calls based on their caller ID. Useful for blocking nuisance callers. Once you’ve added the patterns, you ideally want to know: If the calling numbers you want to block will be caught in your patterns. Regex is not my strong suit so want to make sure it will match. Are some calls going to be inadvertently blocked? [Read More]